If someone has a wooden bathroom, they should know that water needs to soak before getting to the wood. Meaning that it may be too late by the time it starts leaking onto the floor or soaking into the carpet. Soaking wood in polyurethane is a great way to make it waterproof and give it a new lease on life. This article will best explain how to waterproof wood for the bathroom.
Applying the Polyurethane
A good way to apply polyurethane is with a small squeegee. Rub the thickest parts of the polyurethane into the wood so that it goes as deep as possible. The thicker, the better! The thicker it can be made, the better-protected area to have. When using a spray can, this is just as good of a way to go.
Start at the top of the wood, then work your way down, applying the polyurethane as you go. It will prevent parts from drying while working on others to have no gaps or half-done areas once done. Make sure that the water has completely evaporated for at least 24 hours before application. It prevents any future problems from happening when the furniture is finally put into use.
Finalizing the Polyurethane
The final step is to reapply the polyurethane as needed. It purely depends on how much time it is used and how much water it comes across. However, most polyurethane washes off easily with soap and water and is very easy to reapply. The best thing to be done is to apply regularly, especially if the areas that have already started to peel off are noticed or if the wood begins to look dry.
Conclusion
It is as simple as that. A little bit of polyurethane goes a long way to waterproof wood for the bathroom. Not only does it protect it, but it makes the furniture last longer, too. It also helps keep the wood looking new and minimizes the amount of water damage the furniture will go through as time passes.
Leave a Reply