Have you ever seen wood-rotting when it is in natural form? No, the wood can’t rot when it is a tree form. Because the roots give the tree sufficient energy to build its strength. When we cut the tree, there is no more transportation of water and nutrients to wood. There are lots of things in nature, like moisture and fog, to degrade its natural quality. But How to treat wood for outdoor? It is a very tough question to answer, although it is essential to preserve wood from sun and rain outside. Anyway, let’s look for the methods to protect the wood from external elements.
Treating wood for outdoor use generally needs some chemical-based products like sealers and varnishes, which give an extra layer of protection over your paint. When we leave the wood without treatment, it further degrades its quality and damages the entire floor or furniture easily. Let’s go into step by step procedure and get a basic idea on how to treat wood.
Method1: Coat wood sealers
Using wood sealers or sealants are one of the easiest methods to preserve your outdoor wood. They contain elements that give your wood the necessary resistance.
Step1: Firstly, clean your outdoor wood with high-quality sandpaper and make the surface even. This process helps to remove all the dust and unevenness from your wooden surfaces.
Step2: After sanding, clean the dust using a soft dry cloth. Ensuring no more dirt and dust over the wooden surface, wipe it with a wet damped cloth and dry naturally. If you find any part of your wood-decaying, just clean it or replace it with others during the cleaning process.
Step3: Depending on the type of wood and the conditions at your outdoors, get the best wood sealers. Make sure that the sealers withstand sunlight, rain, moisture, and fog. After getting the wood sealant, coat it evenly with a soft-bristle brush. Slowly cover all the areas leaving no pores and gaps, and leave the wood undisturbed for hours.
Step4: After drying, sand your wood once again to remove the excess coating and make it even. Now go for another coat and make your outdoor wood even more durable to external agents. And allow it to dry.
Step5: Once you feel everything is done, just wait for a few days to use it. Complete drying gives you good results.
Method2: Using varnishes:
Varnishes generally contain oils and solvents which give your outdoor wood great shine and protection. It contains polyurethane, which offers extra wood strength and increases its durability.
Step1: Firstly, get the imperfections done and clean the wood with a hell of sandpaper. Make sure that all the dust and dirt over the wooden surface is entirely clean.
Step2: Use a soft wet damped cloth and wipe the leftover dust over the wooden. Cleaning is the key; you have to be very careful before you coat your wood with protectants because dust reacts to protectants’ chemicals and solvents.
Step3: Get the best varnishes that suit your wood material and mix the ingredients according to the instructions. After mixing, apply a thin layer of coating gently along the wooden surfaces using a brush. Allow the thin layer of varnish to dry and leave the wood undisturbed.
Step4: Use sandpaper if you feel the varnish is thick then make it flat. Now, give the second layer of coating and cover all the pores. Repeat the process until you get the required shine.
Step5: Finally, leave the wood undisturbed and allow it to dry naturally. This process makes your outdoor wood more durable to UV rays, moisture, and fog.
Method 3: Oil polishing:
Simple oil polishing can protect your wood from external factors and make your furniture or floor look good. Moreover, this is one of the easy and affordable methods to protect your outdoor wood.
Step1: First and foremost, clean your outdoor wood with sandpaper and make it soft. Now, clear all the dust and wipe off the dirt with a wet damped cloth. And then allow the wood to dry.
Step2: Get the best oil finishes that have good absorbing power to your wood. Generally, most of the oil finishes are made of linseed oils and tung oils. Choose oil and evenly spread it on your wood with the brush and wait for the oils to soak into deeper parts of the wood.
Step3: Try to choose a right ventilated area, so that these oils can have good absorption into the wood. Now, allow the second layer of coating and wait till the oils are absorbed completely.
Step4: Repeat these steps until you feel the wood has good durability and resistance to external elements. Once done with coating, leave the wood undisturbed. Finally, your outdoor wood is ready to use.
Conclusion
These methods on how to treat wood for outdoor use, really work well and give excellent protection to your outdoor wood. We hope the above information helps preserve your wood and keep it extremely safe irrespective of climatic conditions.
Leave a Reply